New Owner, 70' Fasty

Fastback, Squareback, Notchback, T-3 Karmann Ghia.

Moderators: Sluggo, Amskeptic

User avatar
wdollie6
Addicted!
Status: Offline

Re: New Owner, 70' Fasty

Post by wdollie6 » Sat Sep 03, 2022 5:32 pm

An update, finally was able to paint the doors and back lid. I had been procrastinating for some time as I had never actually painted before other than spray can. I watched a "pro" do it with a cigarette hanging out of his mouth, no respirator, but other than that had not even witnessed the process other than videos.

So, I bought an Atom X20 spray gun, mixed up some gray epoxy primer from Restoration Shop and off I went. Plenty of first time mistakes; wrong adapter for quick cup system so had to use the screw on that came with the gun (what a mess) didn't maintain distance and speed while painting, didn't mix enough epoxy, the humidity and temperature were high and the list goes on. Regardless I have now broken through the hidden barrier... fear! Overall the parts came out reasonably well, my son was actually impressed, kids am I right. The biggest issue I have to deal with is excessive orange peel/ripples in one spot, thank god this is a sandable epoxy primer, hopefully will be able to clean that up fairly quickly. The body work I had done, another first, looks reasonably good although I see one spot that will need some love.
20220903_195056.jpg
20220903_195056.jpg (2.23 MiB) Viewed 30456 times
20220903_195202.jpg
20220903_195202.jpg (1.83 MiB) Viewed 30456 times
20220903_195130.jpg
20220903_195130.jpg (1.52 MiB) Viewed 30456 times
1972 Superbeetle Convertible
1972 Westy Bus
1972 Beetle
1970 Fastback
1966 6V Beetle with Sunroof

User avatar
wdollie6
Addicted!
Status: Offline

Re: New Owner, 70' Fasty

Post by wdollie6 » Tue Sep 06, 2022 7:09 am

With the successful priming of the doors and trunk lid I moved to the front fenders. The drivers side was in great shape, the passengers not so good, just the opposite for rear fenders but those will be dealt with next. One question I have with regards to the inside of the fenders is what do people use to seal these up as they already have undercoating that even after wire brushing and scraping the material is stuck solid? My though was to treat with rust converter then add truck bed liner to seal it up, anyone done that?

Pictures of progress:
20220905_160359.jpg
20220905_160359.jpg (797.92 KiB) Viewed 30421 times
20220905_160346.jpg
20220905_160346.jpg (633.83 KiB) Viewed 30421 times
20220906_100453.jpg
20220906_100453.jpg (834.69 KiB) Viewed 30421 times
20220906_100448.jpg
20220906_100448.jpg (884.19 KiB) Viewed 30421 times
1972 Superbeetle Convertible
1972 Westy Bus
1972 Beetle
1970 Fastback
1966 6V Beetle with Sunroof

User avatar
wdollie6
Addicted!
Status: Offline

Re: New Owner, 70' Fasty

Post by wdollie6 » Tue Nov 22, 2022 7:42 am

Some updated pics, from several weeks ago. Since then have finished passenger front fender with rear passenger fender underway. Next step will be to pull the body and clean up any remaining rust around the pan edges, finish running brake lines and final chassis paint. The long, long, process continues. We will persevere.
Fenders.jpg
Fenders.jpg (2.47 MiB) Viewed 29917 times
Driver Front Fender.jpg
Driver Front Fender.jpg (2.46 MiB) Viewed 29917 times
Driver Rear Fender.jpg
Driver Rear Fender.jpg (2.15 MiB) Viewed 29917 times
Driver Rear Fender.jpg
Driver Rear Fender.jpg (2.15 MiB) Viewed 29917 times
1972 Superbeetle Convertible
1972 Westy Bus
1972 Beetle
1970 Fastback
1966 6V Beetle with Sunroof

User avatar
Amskeptic
IAC "Help Desk"
IAC "Help Desk"
Status: Offline

Re: New Owner, 70' Fasty

Post by Amskeptic » Sun Dec 04, 2022 3:40 pm

Persevere! Do not use truck bed liner! People get notions and do not think it through. One notion is that truck bed liner is "strong" or something. Well, it becomes a barricade against any moisture incursion ever being able to leave one the first breach occurs. You want a smooth surfaces, caulk only where it belongs (less is more when you get down towards the bottom ... water needs to drain! to leave! go! a good primer, a decent coat of top paint, then a couple of coats of *paintable* rubberized undercoating that you can spot repair easily each fall after your 20,000 miles of gravel road gallivanting. You want open drains, rapid exit, rapid evaporation. Looking good. I love painting.
BobD - 78 Bus . . . 112,730 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles

User avatar
wdollie6
Addicted!
Status: Offline

Re: New Owner, 70' Fasty

Post by wdollie6 » Mon Jan 30, 2023 10:40 am

Colin, wouldn't paintable rubberized undercoating have the same moisture trapping effect as the truck bed liner? Or are you suggesting it is easier to repair than the bed liner product? I'm sure I am missing something in your reply so wanted to ask the question.
1972 Superbeetle Convertible
1972 Westy Bus
1972 Beetle
1970 Fastback
1966 6V Beetle with Sunroof

User avatar
wdollie6
Addicted!
Status: Offline

Re: New Owner, 70' Fasty

Post by wdollie6 » Tue Feb 21, 2023 11:39 am

Finally separated the pan from the body, attempting to get moving forward again, although difficult with the maple trees dripping as syrup is the priority. Good news is that after additional inspection there is no additional rust to be found on the chassis, other than surface rust. I am hopeful that over the next few days I will be able to clean everything up, convert the rust and coat everything with the gray Master Series followed by a coating of black. Other than body to pan rubbers everything looks good so at this time will not disassemble any further (may regret that later on but have a strong urge to drive this Fastback sooner than later).

Once everything is coated will focus on brake hoses and hard lines as well as installing the Master Cylinder. I am also working on a safe method to get her up on her side so that I can clean up and paint the bottom of the pans with the same product as above. Might epoxy prime after the rust conversion and before Master Series, we'll see how it goes.

Also some small underneath welding on the body to complete, will use my floor lift and braces to make it safe while I take care of those items. Starting to see some light at the far end of the tunnel but still a long way to go.

My self patience is waning, time to get this project done!
Fastback Body.jpg
Fastback Body.jpg (804.86 KiB) Viewed 28719 times
Driver Side Front Chassis.jpg
Driver Side Front Chassis.jpg (1.83 MiB) Viewed 28719 times
chassisfront.jpg
chassisfront.jpg (1.99 MiB) Viewed 28719 times
Chasis Front Passenger.jpg
Chasis Front Passenger.jpg (1.58 MiB) Viewed 28719 times
ChassisFront.jpg
ChassisFront.jpg (1.49 MiB) Viewed 28719 times
Attachments
Rear Chassis.jpg
Rear Chassis.jpg (2.13 MiB) Viewed 28719 times
1972 Superbeetle Convertible
1972 Westy Bus
1972 Beetle
1970 Fastback
1966 6V Beetle with Sunroof

User avatar
wdollie6
Addicted!
Status: Offline

Re: New Owner, 70' Fasty

Post by wdollie6 » Tue Feb 28, 2023 1:05 pm

Finally had a few minutes yesterday to wire brush, then pressure wash the chassis (nice sunny, crisp 30 deg F day, wife thought I was nuts) so was able to paint on some rust converter this morning. Tomorrow, once the converter is done doing its job will coat with the silver Master Series primer, then top coat with their black. After that will flip the chassis on its side to clean up and coat the bottom, have a couple of broken screws that I will have to pull out as well (they held on the bracket underneath the Master Cylinder).

Once that is done and my replacement parts from ISP West arrive, will reassemble the chassis then move back to the body to repair some minor rust spots uncovered when we pulled the body. Feels like progress, although still a long way to go. I am shooting for early summer to fire this Fasty up and get it on the road.
Front Rust Conversion.jpg
Front Rust Conversion.jpg (1.51 MiB) Viewed 28638 times
Rear Rust Conversion.jpg
Rear Rust Conversion.jpg (1.58 MiB) Viewed 28638 times
1972 Superbeetle Convertible
1972 Westy Bus
1972 Beetle
1970 Fastback
1966 6V Beetle with Sunroof

User avatar
wdollie6
Addicted!
Status: Offline

Re: New Owner, 70' Fasty

Post by wdollie6 » Thu Mar 02, 2023 8:19 am

Silver Master Series applied!

Can someone comment on the steering box? It appears that there is supposed to be some sort of plug in the two holes on top. The box was covered with grease/oil which I cleaned up. My fear is that the plugs, or whatever is left of them, fell into the box, not a good thing is this a common occurrence? If I open up the box should I replace whatever is in place with the Corn Grease, which is what I used in my bus box? The steering is nice and tight, minimal play, don't want to mess with it if not necessary.
chassis rear with MS.jpg
chassis rear with MS.jpg (2.33 MiB) Viewed 28608 times
chassis front with MS.jpg
chassis front with MS.jpg (1.26 MiB) Viewed 28608 times
steering box 2.jpg
steering box 2.jpg (2.13 MiB) Viewed 28608 times
steeringbox1.jpg
steeringbox1.jpg (2.09 MiB) Viewed 28608 times
1972 Superbeetle Convertible
1972 Westy Bus
1972 Beetle
1970 Fastback
1966 6V Beetle with Sunroof

User avatar
wdollie6
Addicted!
Status: Offline

Re: New Owner, 70' Fasty

Post by wdollie6 » Thu Mar 02, 2023 12:21 pm

So I pulled the cover on the steering box, removed the remains of the plugs from the grease, then removed as much grease as possible so I could refill with Corn Grease. Worked the steering back and forth to ensure the cavity was filled and left some space at the top, took about half a cartridge of grease, does that sound right. The bushing in the cap has know wear areas and everything else looks good. It did appear that the old grease was sitting in one spot and hadn't moved a whole lot, fortunately, as I mentioned nothing that I could see showed signs of wear.

Now to figure how to adjust everything when I put it back together :scratch: . My aim is to reset it where it was, I marked it to be sure but will have to find out the official method. For now I'll put it back together and consider readjustment when Colin makes his way through again... someday?

In the mean time I will flip the frame up and clean up the bottom, with a wire brush and rust converter then follow the same procedure with Master Series silver followed by black, then maybe truck bed liner. While it is expensive it certainly is an impressive product. In my Super Beetle in FL (had the same M Series treatment) the old battery leaked some acid and I was panicking about the floor damage... absolutely none. I wiped up the acid and found that the black topcoat was untouched by the acid. Needless to say I am a believer! Wish I had used that product on the 66 Beetle and 72 Bus. Oh well, can always redo it if necessary.
1972 Superbeetle Convertible
1972 Westy Bus
1972 Beetle
1970 Fastback
1966 6V Beetle with Sunroof

User avatar
wdollie6
Addicted!
Status: Offline

Re: New Owner, 70' Fasty

Post by wdollie6 » Sat Mar 11, 2023 7:57 am

So before I went forward with working on the bottom I decided to replace the torsion bushings, not my best decision as it turned into a two day slug fest on the drivers side (still not where I like it). The good news is that after trying three different approaches of moving the arms back on the stop I found one that worked easily and safely. I attempted jacking the arm, chaining the arm to the jack, then ended up using a turnbuckle I had laying around. Attached the turnbuckle to the upper shock bolt and one of the lower holes on the arm, done deal, see picture.

The drivers side torsion cover did not go well as compared to the 20 minute effort on the passenger side. Not sure why but the cover would not line up with the holes. Even using longer bolts didn't allow for the cover to be centered over the bushing. Attempted three different times with the same results. May have one more go at it as I am not happy with the outcome, again see pictures. The cover is biased to the bottom where more of the bushing is visible. As I said I tried to resolve this but could not, finally tightened it down and called it good.

Any thoughts on how to fix this issue?
torsion turnbuckle.jpg
torsion turnbuckle.jpg (2.03 MiB) Viewed 28437 times
Torsion Drivers Side 2.jpg
Torsion Drivers Side 2.jpg (1.74 MiB) Viewed 28437 times
Torsion Drivers.jpg
Torsion Drivers.jpg (1.98 MiB) Viewed 28437 times
1972 Superbeetle Convertible
1972 Westy Bus
1972 Beetle
1970 Fastback
1966 6V Beetle with Sunroof

User avatar
wdollie6
Addicted!
Status: Offline

Re: New Owner, 70' Fasty

Post by wdollie6 » Sun Mar 12, 2023 6:00 am

...and yes these areas were freshly painted prior to the install of the bushings, serious touch up now required.
1972 Superbeetle Convertible
1972 Westy Bus
1972 Beetle
1970 Fastback
1966 6V Beetle with Sunroof

User avatar
wdollie6
Addicted!
Status: Offline

Re: New Owner, 70' Fasty

Post by wdollie6 » Thu Apr 13, 2023 2:21 pm

Continue to move forward, top of chassis is painted, brake lines, new shocks, etc. installed and ready to go. Flipped it up on the tires and am in the process of cleaning up the bottom. The usual approach, rust conversion followed by silver Master Series, then a top coat with urethane based Herculiner bed liner. Hopefully will be done this weekend if all goes well. Then back to cleaning up the engine/transmission areas, more Master Series then a top coat. Closing in on putting the car back together.
Chassis Top Painted.jpg
Chassis Top Painted.jpg (1.38 MiB) Viewed 27616 times
Chassis Bottom.jpg
Chassis Bottom.jpg (1.59 MiB) Viewed 27616 times
1972 Superbeetle Convertible
1972 Westy Bus
1972 Beetle
1970 Fastback
1966 6V Beetle with Sunroof

User avatar
wdollie6
Addicted!
Status: Offline

Re: New Owner, 70' Fasty

Post by wdollie6 » Thu Jul 06, 2023 7:32 am

Several weeks ago I had time to "remarry" the body to the chassis, which went together remarkably well, with the exception of a front frame bolt that had broken off. Drilled out the bolt, re-tapped the hole and all is good. The ease of reassembly was a result of replacing the heater channels with the body on, alignment of holes was perfect. At this point the engine/transmission is ready to be reinstalled, just need time to complete the task.

The pictures were taken after the Fasty became a storage unit again, my apologies.
fasty remarried 3.jpg
fasty remarried 3.jpg (2.24 MiB) Viewed 26371 times
Fasty remarried 2.jpg
Fasty remarried 2.jpg (1.66 MiB) Viewed 26371 times
Fasty remarried.jpg
Fasty remarried.jpg (1.92 MiB) Viewed 26371 times

User avatar
wdollie6
Addicted!
Status: Offline

Re: New Owner, 70' Fasty

Post by wdollie6 » Thu Jul 06, 2023 7:35 am

Next is to move back to body work, still have the front hood and the remainder of the body to get in epoxy. Still shooting to have it done this summer at some point.
1972 Superbeetle Convertible
1972 Westy Bus
1972 Beetle
1970 Fastback
1966 6V Beetle with Sunroof

User avatar
wdollie6
Addicted!
Status: Offline

Re: New Owner, 70' Fasty

Post by wdollie6 » Tue Aug 08, 2023 10:45 am

Remounted the panels to check fit up, mostly okay although there are several trouble spots that I need to figure out. Rear lower fender to cowling and lower front. I need to finish this thing... Hoping to paint doors and fenders this week so I can reassemble, set aside and focus on body.

I saw on the Samba they are having the Type 3 Roundup (or whatever it is called) in NY next year, would like to participate if possible.
Fastyfitup.jpg
Fastyfitup.jpg (2.24 MiB) Viewed 24688 times
Fastyfitup 1.jpg
Fastyfitup 1.jpg (2.23 MiB) Viewed 24688 times
Fastyfitup2.jpg
Fastyfitup2.jpg (2.28 MiB) Viewed 24688 times
1972 Superbeetle Convertible
1972 Westy Bus
1972 Beetle
1970 Fastback
1966 6V Beetle with Sunroof

Post Reply