WTB

Sell all your Type IV Engine parts here.

Moderators: Sluggo, Amskeptic, bretski

Post Reply
User avatar
Randy in Maine
IAC Addict!
Location: Old Orchard Beach, Maine
Status: Offline

WTB

Post by Randy in Maine » Fri Jun 29, 2007 1:12 pm

I need to come up with 2 of the wire springs that hold the pushrod tubes in place on a 2.0L. New would be nice. Serviceable would work.

Also the seal that goes between the flap and the oil cooler. Bus Depot can't get them anymore. Again new would be nice, but serviceable would work also.

If you know of someplace that sells that stuff, could you PM me?

Thanks!
79 VW Bus

User avatar
Westy78
IAC Addict!
Location: Stumptown OR
Status: Offline

Post by Westy78 » Fri Jun 29, 2007 6:04 pm

Randy, try Chris at Busted Bus. I just got a bunch of random stuff that I thought I was going to have a hard time finding but he had it all. How goes the engine build?
Chorizo, it's what's for breakfast.

User avatar
Randy in Maine
IAC Addict!
Location: Old Orchard Beach, Maine
Status: Offline

Post by Randy in Maine » Sat Jun 30, 2007 2:04 pm

Scott at German Supply took care of me. Engine build is going although slower than I expected. Work has been keeping me pretty busy.

I should be a lot closer by the 4th. =D>
79 VW Bus

Post Reply