Van's 914 Engine Build Blog

All Porsche 911's, 912's & 914's.

Moderators: Sluggo, Amskeptic

Post Reply
Boxcar
Addicted!
Location: Itinerant Fledgling
Status: Offline

Van's 914 Engine Build Blog

Post by Boxcar » Wed Jan 29, 2014 9:06 am

=D>
I mean. it is inspirational.
Its still up on the web. Thinkin he is building a 2270. So he does a bit of clearancing effort. Essentially all a T4 fellow would need tho. Whether for 914 or 75+ Bus
Shall I fetch the URL and post it here?
1975 003 Auto Westy L90D

repair!!!!aug2015
Jan/16 Bumped mixture a few notches richer. finally developing HP.


1.8L/LJet/Pertron DVDA+PertronixCompufire 42/36Ham Heads/AA 93mm pistons/barrels.Porsc.Swiv.Adjusters/CromoSteel pushrds/ Web 9550Cam/55cc chmbr.,035 squish,8.6:1CR/German Supply VWCanadaReman Rods/Schadek 26mmPump/vdo dualOP8/10#low sender/Quart Deep Sump
Backdate Htr bxs,reflanged 914 4into1. Two and three eighths inch collector,magniflow*muffler

User avatar
Xelmon
Sedna of VW lovers
Location: LA or Portland, OR
Status: Offline

Re: Van's 914 Engine Build Blog

Post by Xelmon » Wed Jan 29, 2014 11:45 am

Please do, I need some mid-day reading when it slows down at work.

Boxcar
Addicted!
Location: Itinerant Fledgling
Status: Offline

Re: Van's 914 Engine Build Blog

Post by Boxcar » Fri Jan 31, 2014 5:20 am

Xelmon wrote:Please do, I need some mid-day reading when it slows down at work.
well, read where your conscience deems fit. I dont want to encourage a budding Bolshevik;).

Vans 914 Build =D>
www.ephotomotion.com/914engine/
1975 003 Auto Westy L90D

repair!!!!aug2015
Jan/16 Bumped mixture a few notches richer. finally developing HP.


1.8L/LJet/Pertron DVDA+PertronixCompufire 42/36Ham Heads/AA 93mm pistons/barrels.Porsc.Swiv.Adjusters/CromoSteel pushrds/ Web 9550Cam/55cc chmbr.,035 squish,8.6:1CR/German Supply VWCanadaReman Rods/Schadek 26mmPump/vdo dualOP8/10#low sender/Quart Deep Sump
Backdate Htr bxs,reflanged 914 4into1. Two and three eighths inch collector,magniflow*muffler

User avatar
Xelmon
Sedna of VW lovers
Location: LA or Portland, OR
Status: Offline

Re: Van's 914 Engine Build Blog

Post by Xelmon » Mon Feb 03, 2014 11:31 am

Read through it, absolutely great read.

Some of the fine fine details seemed to be missing, never the less there are great things in there, such as how to add an electronic ignition system in.

bajaman72
Addicted!
Location: Quartz Hill, CA
Contact:
Status: Offline

Re: Van's 914 Engine Build Blog

Post by bajaman72 » Thu Feb 13, 2014 2:06 pm

I think I seen a video as well of this engine going together. It's in fast motion, but still pretty informative. I'll dig around for the link.

Edit: Here it is

http://youtu.be/c3CzLauIKwE
1968 Karmann Ghia - Driver
1969 Transporter - Project
1959 Karmann Ghia - Full Race Car

Post Reply