Yes the one in the first post is trashed and will be replaced. Upon further inspection before I made the order I inspected and the other two are not as bad as the pic shows. Mainly some polishing but very little grooving. One joint has some pitting in one channel. All balls are fine and the inner race on both are fine.sgkent wrote: ↑Mon Aug 28, 2017 9:28 amlooking at those photos, the grooves are too deep to use that one again. It will catch the ball bearings and stop moving again. if you can get by with just one that may be all it needs. Keep the good ball bearings that weren't discolored or damaged. If any of the ball bearings are damaged on the other CV's you can use them there.
4 Boots and 1 joint on the way.