Page 3 of 3

Re: Parts: Known to be Acceptable

Posted: Thu Aug 22, 2019 9:28 pm
by asiab3
Echlin points and condenser from NAPA auto, mine from White Salmon, Washington.

Dwell was set to 41* on July 24th [2016]
67,798 miles later, I replaced those points while troubleshooting an unrelated issue. They only required a 200-mile break-in adjustment and grease twice a year. Neither the points gap nor timing changed over the next three years and three laps of the country.

--

In related news, I have e-mails out to a few parts chains looking for 237B tailpipes. If they turn up dry I will consult the muffler shop that just made me a nice 1973 fuel filler pipe out of exhaust components.

Robbie

Re: Parts: Known to be Acceptable

Posted: Sat Jul 04, 2020 5:55 pm
by Amskeptic
Phillips Head Engine Tins Screws for later Type 4 engines:

aircooled.net

https://vwparts.aircooled.net/6-x-12mm- ... 1uXTrigkPc

Image



belmetric:

https://www.belmetric.com/6mm-c-10_74_1 ... cZWph3rUec

You may need to shorten for certain applications ...

Image