cam part #

soulful66 · Post by **soulful66** » Tue Mar 13, 2007 5:34 pm

I have not been able to find a site that will tell me what application the following camshafts are for. Anyone able to tell me? Please :D

021-109-111B
021-109-111C

Thanks in advance!
Best Regards,
John

soulful66 · Post by **soulful66** » Tue Mar 13, 2007 7:15 pm

After more research, I know that the #'s I posted was the cam gear #. So is there any relationship of the cam gear # to a certain cam application?
Best Regards,
John

Post by **Amskeptic** » Thu Mar 15, 2007 7:42 pm

soulful66 wrote:After more research, I know that the #'s I posted was the cam gear #. So is there any relationship of the cam gear # to a certain cam application?
Best Regards,
John

No. These cam gears all have different radius cuts to handle various dimensional differences between crankshaft and camshaft centerlines. The different cuts are noted with the pitch numbers always found on the backside of the outer circumference of the gear itself. In the good ol' days you could find a +7 down to 0 and down further to -7.
Colin

soulful66 · Post by **soulful66** » Sat Mar 17, 2007 5:42 pm

I will check the # between the lobes and post them.
Thank You,
John

Post by **Amskeptic** » Sat Mar 17, 2007 6:13 pm

soulful66 wrote:I will check the # between the lobes and post them.
Thank You,
John

You wont find them between lobes. Lobes are for camshaft billets. Between the gear teeth, perhaps, but usually just under the teeth profiles at the outer circumference of the gear itself.
Colin

soulful66 · Post by **soulful66** » Sat Mar 17, 2007 6:15 pm

Here is the #s

Cam #1 021.101j gear #'s 021-109-111c 12H -4

Cam #2 021.101j gear #'s 021-109-111c 12 -4

Cam #3 021.108 gear #'s 021-109-111b 9H -3

I was give these 3 re-ground cam from a VW repair shop owner who is retiring. I would like to know what these are for so I can know if they are usable in any of my buses.

Best Regards,
John

Itinerant Air-Cooled

Itinerant Air-Cooled

cam part #

cam part #