Steering Damper replacement (Broke a bolt!)
Posted: Thu Jun 17, 2010 7:29 pm
I swear that the thing was moving. It must have been my impatience. It hurts pretty bad when your wrist hits something metal at a high rate of speed. Ice is helping. I am finding a lot of rusty bolts! I have a feeling I will be spending the winter under the bus.......
[albumimg]3055[/albumimg]
I noticed that there is a bolt on the back side. Now the question, is the mount that holds the damper to the beam threaded? If it is not I should be able to just tap that bolt loose right? I don't want to drill the remains out, as the angle makes it so my drill will not work in this situation. I would need a different drill to do that.
[albumimg]3055[/albumimg]
I noticed that there is a bolt on the back side. Now the question, is the mount that holds the damper to the beam threaded? If it is not I should be able to just tap that bolt loose right? I don't want to drill the remains out, as the angle makes it so my drill will not work in this situation. I would need a different drill to do that.