Ball joints revisited.

Moderators: Sluggo, Amskeptic

User avatar
regis101
Getting Hooked!
Location: Livermore, Ca
Status: Offline

Post by regis101 » Tue Nov 20, 2007 11:23 pm

germansupplyscott wrote:yes, exactly. i had some of the ocap also but when i heard about this possible issue i removed them from the website.
Thank you. I'll be in touch

User avatar
Amskeptic
IAC "Help Desk"
IAC "Help Desk"
Status: Offline

Post by Amskeptic » Wed Nov 21, 2007 10:59 am

germansupplyscott wrote: most joints have some marking stamped on them.
Mine are Lemforder. . . . . . . . . . :pale:
BobD - 78 Bus . . . 112,730 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles

User avatar
hambone
Post-Industrial Non-Secular Mennonite
Location: Portland, Ore.
Status: Offline

Post by hambone » Wed Nov 21, 2007 11:02 am

Maybe you got the one bad outa 10,000...
No sense pissing yourself off forver, change those things out when you can afford it. Your bus should make you happy.
Hey a question, can one assume that if tie rods are shot then so are ball joints? Gotta do em' on the Beetle this spring, no sense doing a 1/2 assed job.
http://greencascadia.blogspot.com
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat

User avatar
Amskeptic
IAC "Help Desk"
IAC "Help Desk"
Status: Offline

Post by Amskeptic » Wed Nov 21, 2007 12:14 pm

hambone wrote: Hey a question, can one assume that if tie rods are shot then so are ball joints?
Nope. Ball joints usually outlast tie rod ends for no better reason than that the boots last longer.
Colin
BobD - 78 Bus . . . 112,730 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles

User avatar
hambone
Post-Industrial Non-Secular Mennonite
Location: Portland, Ore.
Status: Offline

Post by hambone » Wed Nov 21, 2007 12:57 pm

What if the boots are torn? I think they are...
http://greencascadia.blogspot.com
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat

bus71
Addicted!
Status: Offline

Post by bus71 » Wed Nov 21, 2007 1:25 pm

My balljoints match the lemforder picture. This does bring back the memory of 1992 or so when I let a shop attempt the job. I drove about 2 miles and the suspension siezed. The shop said it was my gas shocks. Huh? Pulled shocks, still stuck. They "fixed" it, but I ended up later redoing myself. It seems possible that incorrect pressing may be responsible. I did alot of asking around before the last replacement. Good luck, and hope this helps.

User avatar
Amskeptic
IAC "Help Desk"
IAC "Help Desk"
Status: Offline

Post by Amskeptic » Wed Nov 21, 2007 1:43 pm

hambone wrote:What if the boots are torn? I think they are...
I packed the rip with grease for 26 years. . . . kept the dirt out nicely. I am still sorry I changed out my ball joints. They worked fine.
BobD - 78 Bus . . . 112,730 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles

User avatar
Amskeptic
IAC "Help Desk"
IAC "Help Desk"
Status: Offline

Post by Amskeptic » Wed Nov 21, 2007 1:43 pm

bus71 wrote: I let a shop attempt the job. I drove about 2 miles and the suspension siezed. The shop said it was my gas shocks. Huh? Pulled shocks, still stuck.
Is there no respite from idiocy??????
Colin
BobD - 78 Bus . . . 112,730 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles

User avatar
hambone
Post-Industrial Non-Secular Mennonite
Location: Portland, Ore.
Status: Offline

Post by hambone » Wed Nov 21, 2007 3:05 pm

Thanks Colin for your advice, I will pack away! Grease is cheap, OE German quality is but vapor these days...
http://greencascadia.blogspot.com
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat

User avatar
spiffy
IAC Addict!
Location: Walla Walla, WA
Status: Offline

Post by spiffy » Wed Nov 21, 2007 3:34 pm

hambone wrote:Thanks Colin for your advice, I will pack away! Grease is cheap, OE German quality is but vapor these days...
I have been doing the same thing on my driver's side joint for a cuppla years now and it is still happy happy.
78 Riviera "Spiffy"
67 Riviera "Bill"

User avatar
hippiewannabe
Old School!
Status: Offline

Post by hippiewannabe » Sat Feb 16, 2008 5:36 pm

Amskeptic wrote:
hambone wrote:What if the boots are torn? I think they are...
I packed the rip with grease for 26 years. . . . kept the dirt out nicely. I am still sorry I changed out my ball joints. They worked fine.
Is this the final word on the topic? I've got horribly ripped boots and nasty looking grease in there, but the steering seems fine. Hate to replace what isn't broken with something that might be not as good. Has anyone thought of a way to hack some kind of boot replacement? I have seen replacement CV boots that are split, and go around the joint like a kimono.

bus71
Addicted!
Status: Offline

Post by bus71 » Sat Mar 08, 2008 7:08 pm

I would just wipe them clean as best you can and grease them often. We have done this with our bug for many years. Just recently replaced one balljoint that was loose. Given the issues with new ones, I would live with it as long as possible. Good luck!

User avatar
chitwnvw
Resident Troublemaker
Location: Chicago.
Status: Offline

Post by chitwnvw » Wed Jun 18, 2008 1:44 pm

How does one extract the ball joint from it's socket if it needs to be replaced?

bus71
Addicted!
Status: Offline

Post by bus71 » Wed Jun 18, 2008 10:02 pm

On a bus you remove the torsion arm, then press the balljoint out with a very strong press. On our bug, we used a screw type press that removes the joint on the car.

User avatar
chitwnvw
Resident Troublemaker
Location: Chicago.
Status: Offline

Post by chitwnvw » Wed Jun 18, 2008 10:34 pm

So this isn't a roadside repair? One either brings in the pros or has the tools on hand.

Post Reply