Bus Engine Removal Questions

Bus, Microbus, Transporter, Station Wagon, Vanagon, Camper, Pick-Up.

Moderators: Sluggo, Amskeptic

User avatar
hambone
Post-Industrial Non-Secular Mennonite
Location: Portland, Ore.
Status: Offline

Post by hambone » Mon Mar 09, 2009 10:38 am

I've always just removed the engine. Doesn't seem to matter either way, but I can imagine both combined are quite heavy. Something to consider.
http://greencascadia.blogspot.com
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat

User avatar
Vdubtech
IAC Addict!
Location: East Syracuse, NY
Status: Offline

Post by Vdubtech » Mon Mar 09, 2009 10:58 am

hambone wrote: I can imagine both combined are quite heavy. Something to consider.
What difference does that make? It's all on a jack anyway, it's not like someone is out there wrestling the engine out of their Bus by hand. The tranny only weighs 94 pounds, you really aren't adding all that much weight in the grand scheme of things. Whatever way works for you I guess. I find it much easier and less work to remove and install them as a unit. I've never needed anyone else's help to remove or install them together.

User avatar
hambone
Post-Industrial Non-Secular Mennonite
Location: Portland, Ore.
Status: Offline

Post by hambone » Mon Mar 09, 2009 11:21 am

It makes 94 lbs difference.
I DID say it doesn't seem to matter either way...
http://greencascadia.blogspot.com
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat

User avatar
spiffy
IAC Addict!
Location: Walla Walla, WA
Status: Offline

Post by spiffy » Mon Mar 09, 2009 11:26 am

That and you and I are not built like a brick shithouse.

I guess you have to be BAMF to use that method :geek:
78 Riviera "Spiffy"
67 Riviera "Bill"

User avatar
vwlover77
IAC Addict!
Location: North Canton, Ohio
Status: Offline

Post by vwlover77 » Mon Mar 09, 2009 11:36 am

I just use two floor jacks. One under the engine, and one under the trans. Slick as anything. I'm not a BAMF by a long shot and I've never had any help with my multiple combined engine/tranny removals and replacements.

Image
Don

---------------------------
78 Westy
71 Super Beetle Convertible Autostick

"When we let our compassion go, we let go of whatever claim we have to the divine." - Bruce Springsteen

User avatar
covelo
Old School!
Location: Fairfax, CA
Status: Offline

Post by covelo » Mon Mar 09, 2009 11:59 am

It does seem elegant to pull them out together. I did find the whole mating experience to be stressful with me on my back under the bus and my girlfriend trying to move it in place from behind, especially when it didn't want to go in at first.
‘80 Vanagon Westfalia - 54,400 miles
'91 Toyota Pickup (4WD long bed) - 199,960 miles
1987 Alfa Spider Veloce - 166,400 miles
2017 VW E-Golf - 5,600 miles

User avatar
chitwnvw
Resident Troublemaker
Location: Chicago.
Status: Offline

Post by chitwnvw » Mon Mar 09, 2009 12:46 pm

This isn't free speech Covelo, I don't think you can write that sort of thing in Type 2.

User avatar
hambone
Post-Industrial Non-Secular Mennonite
Location: Portland, Ore.
Status: Offline

Post by hambone » Mon Mar 09, 2009 1:18 pm

Dirty boy! I didnt' catch that the first time.
http://greencascadia.blogspot.com
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat

User avatar
Amskeptic
IAC "Help Desk"
IAC "Help Desk"
Status: Offline

Post by Amskeptic » Mon Mar 09, 2009 3:31 pm

My personal preference, alone or with others, is to R & R the engine only. I think my CV joints and boots prefer that too. In the time it takes to remove 12 CV bolts, clean and wrap the CVs, disconnect the ground strap and reverse wires and clean the flanges, I have the two 15mm bolts outta there and the transaxle resting on the whatever, boof, engine out.
see my laundromat parking lot video engine pull in the rain! watch friendly people come up and ask questions! watch the crabby mechanic lasso one of the friendly people with an oil soaked engine seal!
Colin :pirate:
BobD - 78 Bus . . . 112,730 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles

vdubyah73
IAC Addict!
Status: Offline

Post by vdubyah73 » Mon Mar 09, 2009 4:19 pm

you can pull the engine alone in a parking lot by driving on wheel up on a curb and jacking up the other side onto whatever. Then with a handful of hand tools, a skate board and a bottle jack, The engine is on the ground as fast as you can go. Pulling the whole thing is messy and time consuming. Prolly not good for CV's and boots and gawd it's a pain in the ass to balance while jacking it back into place.
Tip for getting splines to mesh with the clutch disc.
Put transmission in gear. Prevent one wheel from turning with a wedge or whatever, while allowing the other wheel to rotate. If you get the engine almost home and just can't get that last 1/2 inch or so, give the free wheel a kick while shoving and wiggling the engine in.
1/20/2013 end of an error
never owned a gun. have fired a few.

ohiowesty
I'm New!
Status: Offline

Re: Bus Engine Removal Questions

Post by ohiowesty » Mon Jun 05, 2017 7:51 pm

Where can I find the laundromat parking lot engine pull video?

User avatar
Amskeptic
IAC "Help Desk"
IAC "Help Desk"
Status: Offline

Re: Bus Engine Removal Questions

Post by Amskeptic » Sun Jun 11, 2017 5:57 pm

ohiowesty wrote:
Mon Jun 05, 2017 7:51 pm
Where can I find the laundromat parking lot engine pull video?


You can't. I used to babble bs back when I was young and manic. No such video exists.
Colin
BobD - 78 Bus . . . 112,730 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles

Post Reply