Took off the valve covers off a picknpull engine first time and the cork gaskets were glued to the head(not the covers) with some very tough/hard stuff that is not coming off very well. I've tried a razor blade and it really is not doing the job. Any idea off solvents or other methods off getting this stuff off?
Thanks
valve cover gasket glued to head.
-
- Addicted!
- Location: Portland, Oregon
- Contact:
- Status: Offline
- tristessa
- Trusted Air-Cooled Maniac
- Location: Uwish Uknew, Oregon
- Status: Offline
Re: valve cover gasket glued to head.
Carb cleaner? Brake cleaner? Paint stripper?
Remember, only YOU can prevent narcissism!
-
- Addicted!
- Location: Portland, Oregon
- Contact:
- Status: Offline
Re: valve cover gasket glued to head.
actually found some paint stripper and it works, tho slowly. Thanks
- Kubelwagen
- Addicted!
- Location: Portland, OR
- Status: Offline
Re: valve cover gasket glued to head.
FIRE
Bwhahahhahhahbahah
Ok maybe not. Tried goof off?
Bwhahahhahhahbahah
Ok maybe not. Tried goof off?
Patience the 81 Adventurewagen