Bus seals sale
Moderators: Sluggo, Amskeptic, vdubzen
- werksberg
- Old School!
- Location: The OC
- Status: Offline
Bus seals sale
1968 - 1979 Bus door seals Pair (D & P side) $30
1972 -1979 rear Cargo door seal OEM $125
1968 - 1979 Side slide door seal German $125
Brazil $100
1968-1979 Front windshield seal Brazil $30
1968-1979 Engine weather seal German $60
Plus shipping (I like to use USPS Flat Rate Boxes at $10 to $12 each within the USA!) and 7 3/4% Calif. sales tax (if you live here...)
Paypal werksberg@sbcglobal.net
And if you do use Paypal, please state "IAC" (and IAC screen name too), make, model and year too!
MO / check (needs to clear before shipped) please state "IAC" (and IAC screen name too), make, model and year too!
Werksberg Products
PO Box 931
Garden Grove, Ca.
JM werksberg
1972 -1979 rear Cargo door seal OEM $125
1968 - 1979 Side slide door seal German $125
Brazil $100
1968-1979 Front windshield seal Brazil $30
1968-1979 Engine weather seal German $60
Plus shipping (I like to use USPS Flat Rate Boxes at $10 to $12 each within the USA!) and 7 3/4% Calif. sales tax (if you live here...)
Paypal werksberg@sbcglobal.net
And if you do use Paypal, please state "IAC" (and IAC screen name too), make, model and year too!
MO / check (needs to clear before shipped) please state "IAC" (and IAC screen name too), make, model and year too!
Werksberg Products
PO Box 931
Garden Grove, Ca.
JM werksberg
Facebook for new product releases and special deals: Werks Berg
http://stores.ebay.com/werksberg
Search the Samba under werksberg for our products on sale there too....but order direct on here for a special IAC shipping savings
SOS: Support Our Shops....
werksberg@sbcglobal.net
http://stores.ebay.com/werksberg
Search the Samba under werksberg for our products on sale there too....but order direct on here for a special IAC shipping savings
SOS: Support Our Shops....
werksberg@sbcglobal.net
- hambone
- Post-Industrial Non-Secular Mennonite
- Location: Portland, Ore.
- Status: Offline
What about bus engine compartment sound deading sheets (masonite?)? They mount to the roof right above the engine. Don't think anyone is making them, you can corner the market.
Early bays used solid sheets, later bays had many perforations.
Early bays used solid sheets, later bays had many perforations.
http://greencascadia.blogspot.com
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
- werksberg
- Old School!
- Location: The OC
- Status: Offline
Hmmm...good point! I'll keep an eye out for a connection for some heat and oil resistant sheet materials.
I'll look a few friends engine compartments for what they have for ideas too.
Thanks, JM.
I'll look a few friends engine compartments for what they have for ideas too.
Thanks, JM.
Facebook for new product releases and special deals: Werks Berg
http://stores.ebay.com/werksberg
Search the Samba under werksberg for our products on sale there too....but order direct on here for a special IAC shipping savings
SOS: Support Our Shops....
werksberg@sbcglobal.net
http://stores.ebay.com/werksberg
Search the Samba under werksberg for our products on sale there too....but order direct on here for a special IAC shipping savings
SOS: Support Our Shops....
werksberg@sbcglobal.net
- werksberg
- Old School!
- Location: The OC
- Status: Offline
A friend of mine is having a CNC lazer company to make these engine bay sound deadner panels and he hopes to have them at the OCTO Bus show on Sat. before the VW Classic.hambone wrote:What about bus engine compartment sound deading sheets (masonite?)? They mount to the roof right above the engine. Don't think anyone is making them, you can corner the market.
Early bays used solid sheets, later bays had many perforations.
Bill & Steve's VW Shop (562) 923-3251 already has some of them....but the guy that made them hand drilled all the holes himself.....can you say time extensive!
Facebook for new product releases and special deals: Werks Berg
http://stores.ebay.com/werksberg
Search the Samba under werksberg for our products on sale there too....but order direct on here for a special IAC shipping savings
SOS: Support Our Shops....
werksberg@sbcglobal.net
http://stores.ebay.com/werksberg
Search the Samba under werksberg for our products on sale there too....but order direct on here for a special IAC shipping savings
SOS: Support Our Shops....
werksberg@sbcglobal.net
- hambone
- Post-Industrial Non-Secular Mennonite
- Location: Portland, Ore.
- Status: Offline
Early bays don't have the holes. I actually wound up using my originals. Unwarped them in the rain, sealed the cracks and rips and painted with oilbased Rustoleum. Look like new!
Hey where are your front door seals made? Are they still on sale?
Hey where are your front door seals made? Are they still on sale?
http://greencascadia.blogspot.com
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
- hambone
- Post-Industrial Non-Secular Mennonite
- Location: Portland, Ore.
- Status: Offline
68-69 two year only parts? Here we go again!
http://greencascadia.blogspot.com
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
- dtrumbo
- IAC Addict!
- Location: Mill Creek, WA
- Status: Offline
My '70 has the tar-board looking stuff with no holes like yours. So make that three-year-only!hambone wrote:68-69 two year only parts? Here we go again!
- Dick
1970 Transporter. 2015cc, dual Weber IDF 40's
1978 Riviera Camper. Bone stock GE 2.0L F.I.
1979 Super Beetle convertible.
... as it turns out, it was the coil!
1970 Transporter. 2015cc, dual Weber IDF 40's
1978 Riviera Camper. Bone stock GE 2.0L F.I.
1979 Super Beetle convertible.
... as it turns out, it was the coil!
- vistacruzer
- IAC Addict!
- Location: portland
- Status: Offline
- hambone
- Post-Industrial Non-Secular Mennonite
- Location: Portland, Ore.
- Status: Offline
There are metal tabs that bend over around the perimeters of the boards. I also used Liquid Nails TM underneath.
I'll show you next time I sees ya.
I'll show you next time I sees ya.
http://greencascadia.blogspot.com
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
- vistacruzer
- IAC Addict!
- Location: portland
- Status: Offline
- werksberg
- Old School!
- Location: The OC
- Status: Offline
Sorry, I missed seeing there was any posts on this thread. The door seals are Braisilian made door seals that are $30 for a pair.hambone wrote:Early bays don't have the holes. I actually wound up using my originals. Unwarped them in the rain, sealed the cracks and rips and painted with oil based Rustoleum. Look like new!
Hey where are your front door seals made? Are they still on sale?
Facebook for new product releases and special deals: Werks Berg
http://stores.ebay.com/werksberg
Search the Samba under werksberg for our products on sale there too....but order direct on here for a special IAC shipping savings
SOS: Support Our Shops....
werksberg@sbcglobal.net
http://stores.ebay.com/werksberg
Search the Samba under werksberg for our products on sale there too....but order direct on here for a special IAC shipping savings
SOS: Support Our Shops....
werksberg@sbcglobal.net
- pjalau
- Getting Hooked!
- Contact:
- Status: Offline
And confirming, my 1970 does not have the holes either.
History of Holes by Peters improbably history with apologies to Mr. Peabody and his boy Sherman.
Holes appeared in 1971. Previous to that, there were no holes. Anywhere. Ever. The hole was invented in January 1971 accidentally by Dr. Robert Hole while deep frying a powdered dough. Dr. Hole was a former police officer who offered them to friends who remained in the force. The multipurpose of the hole was immediate recognized and used for a wide range of products including masonite engine sound deadeners for late bays. There are also other uses for the hole. (The author respectfully requests that all comments outside the bounds of common decency be posted as either a clever double-entendre, or not at all.)
P.S. I have a creative excercise to work on today, thanks for an opportunity to warm up.
History of Holes by Peters improbably history with apologies to Mr. Peabody and his boy Sherman.
Holes appeared in 1971. Previous to that, there were no holes. Anywhere. Ever. The hole was invented in January 1971 accidentally by Dr. Robert Hole while deep frying a powdered dough. Dr. Hole was a former police officer who offered them to friends who remained in the force. The multipurpose of the hole was immediate recognized and used for a wide range of products including masonite engine sound deadeners for late bays. There are also other uses for the hole. (The author respectfully requests that all comments outside the bounds of common decency be posted as either a clever double-entendre, or not at all.)
P.S. I have a creative excercise to work on today, thanks for an opportunity to warm up.
- werksberg
- Old School!
- Location: The OC
- Status: Offline
The '68 - '71 Weekender model Bus engine compartment firewall kit does not have holes in them as they are smaller panels that fit up into the areas between the steel bar supports. I need to get my hands on a set asap.hambone wrote:What about bus engine compartment sound deading sheets (masonite?)? They mount to the roof right above the engine. Don't think anyone is making them, you can corner the market.
Early bays used solid sheets, later bays had many perforations.
But here's the non Weekender model (spare tire in the DS rear upper storage tub area) '68 - '71 Bus firewall kit (2x piece) $65 plus shipping:
And here's the '73 - '79 Bus firewall kit (3x piece) $65 plus shipping:
Both come with all the hardware like the 3/16" oversize head alum pop rivets and you use the stock bend over tabs too.
The '73 - '79 kit includes black oxide sheet metal screws for the engine check lid...which is included in the kit too.
I do have a '72 year only OEM firewall kit (2x piece) here and I hope to get to those masters in the coming weeks.....
Facebook for new product releases and special deals: Werks Berg
http://stores.ebay.com/werksberg
Search the Samba under werksberg for our products on sale there too....but order direct on here for a special IAC shipping savings
SOS: Support Our Shops....
werksberg@sbcglobal.net
http://stores.ebay.com/werksberg
Search the Samba under werksberg for our products on sale there too....but order direct on here for a special IAC shipping savings
SOS: Support Our Shops....
werksberg@sbcglobal.net