Sliding Door Hinge Assy Refresh

Moderators: Sluggo, Amskeptic

User avatar
Sneaks
I'm New!
Location: Albany TWP, Me
Contact:
Status: Offline

Re: Sliding Door Hinge Assy Refresh

Post by Sneaks » Thu Aug 02, 2018 12:20 pm

I'm doing this process now, thanks for the awesome write up. Got my mechanism out, my nylon block is blown the hell out, so that will be replaced. The roller was not moving, a little help from PB Blaster got it rolling but before I spend any time on the roller, I have a question...

Is there more than one roller design? Mine doesn't have an outer lip like what I see above. It only has an inner lip. It doesn't look like it's broken or an outer lip (part that would actually be closer to the body) is worn off.
IMG_20180802_154223.jpg
'79 Transporter "Ducky"

User avatar
Amskeptic
IAC "Help Desk"
IAC "Help Desk"
Status: Offline

Re: Sliding Door Hinge Assy Refresh

Post by Amskeptic » Thu Aug 02, 2018 2:59 pm

Sneaks wrote:
Thu Aug 02, 2018 12:20 pm
I'm doing this process now, thanks for the awesome write up. Got my mechanism out, my nylon block is blown the hell out, so that will be replaced. The roller was not moving, a little help from PB Blaster got it rolling but before I spend any time on the roller, I have a question...

Is there more than one roller design? Mine doesn't have an outer lip like what I see above. It only has an inner lip. It doesn't look like it's broken or an outer lip (part that would actually be closer to the body) is worn off.

IMG_20180802_154223.jpg
Your outer lip has taken its leave of the premises. Get a new proper roller.
Colin
BobD - 78 Bus . . . 112,730 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles

User avatar
Sneaks
I'm New!
Location: Albany TWP, Me
Contact:
Status: Offline

Re: Sliding Door Hinge Assy Refresh

Post by Sneaks » Thu Aug 02, 2018 3:25 pm

Thank you!
'79 Transporter "Ducky"

stevespeirs
I'm New!
Status: Offline

Re: Sliding Door Hinge Assy Refresh

Post by stevespeirs » Fri Nov 09, 2018 12:36 pm

Another wonderful tutorial to add to my list of things to tackle. Thanks, Colin!

Before making a start, I assume there shouldn't be as much play in the u-bracket/hinge as my video suggests? This is me lifting the open door from the rear, bottom corner.

https://youtu.be/lRtA2mBDvFQ

User avatar
Amskeptic
IAC "Help Desk"
IAC "Help Desk"
Status: Offline

Re: Sliding Door Hinge Assy Refresh

Post by Amskeptic » Mon Nov 12, 2018 7:47 am

stevespeirs wrote:
Fri Nov 09, 2018 12:36 pm
Another wonderful tutorial to add to my list of things to tackle. Thanks, Colin!
Before making a start, I assume there shouldn't be as much play in the u-bracket/hinge as my video suggests? This is me lifting the open door from the rear, bottom corner.
[media
That is trouble.
a) obtain a good used assembly at once.

b) I think a machinist could provide you with a bushing pressed into the re-piloted hinge with an inner diameter that matches that of the pin.
Colin
BobD - 78 Bus . . . 112,730 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles

stevespeirs
I'm New!
Status: Offline

Re: Sliding Door Hinge Assy Refresh

Post by stevespeirs » Mon Nov 12, 2018 10:28 am

Amskeptic wrote:
Mon Nov 12, 2018 7:47 am
stevespeirs wrote:
Fri Nov 09, 2018 12:36 pm
Another wonderful tutorial to add to my list of things to tackle. Thanks, Colin!
Before making a start, I assume there shouldn't be as much play in the u-bracket/hinge as my video suggests? This is me lifting the open door from the rear, bottom corner.
[media
That is trouble.
a) obtain a good used assembly at once.

b) I think a machinist could provide you with a bushing pressed into the re-piloted hinge with an inner diameter that matches that of the pin.
Colin
Used assembly on its way and should be delivered tomorrow. Managed to score a chrome u-bracket too :thumbleft:

In other news on the opposite side of the hinge assembly, cleaned up the oh-so-dirty rail, replaced the badly worn nylon block and fitted a new roller. The old roller had a bit of a flat spot, so great to have things rolling along nicely now.

Looking forward to fixing the hinge play, then installing new, flexible beading and popping the cover back on.

So thankful for the step-by-step tutorial and words of wisdom. Cheers, Colin!

User avatar
vwlover77
IAC Addict!
Location: North Canton, Ohio
Status: Offline

Re: Sliding Door Hinge Assy Refresh

Post by vwlover77 » Thu Apr 18, 2019 10:33 am

Amskeptic wrote:
Wed Jan 05, 2011 8:34 pm
....plastic glide.
Image
My plastic glide is broken off behind the rail, so the glide moves outward away from the rail right before the door pivots into the latch.

I have a replacement glide on order, but I have questions:

1. How does the plastic glide attach? Looks like a big rivet? How do I duplicate that?
2. Is there potentially some other problem with my hinge mechanism that exerts undue outward pressure on the glide? Is that what caused it to break in the first place?
Don

---------------------------
78 Westy
71 Super Beetle Convertible Autostick

"When we let our compassion go, we let go of whatever claim we have to the divine." - Bruce Springsteen

User avatar
Amskeptic
IAC "Help Desk"
IAC "Help Desk"
Status: Offline

Re: Sliding Door Hinge Assy Refresh

Post by Amskeptic » Mon Apr 22, 2019 7:02 pm

vwlover77 wrote:
Thu Apr 18, 2019 10:33 am
1. How does the plastic glide attach? Looks like a big rivet?
It's a big rivet.

vwlover77 wrote:
Thu Apr 18, 2019 10:33 am
How do I duplicate that?
With another big rivet or a tidy little nut/bolt.

vwlover77 wrote:
Thu Apr 18, 2019 10:33 am
2. Is there potentially some other problem with my hinge mechanism that exerts undue outward pressure on the glide? Is that what caused it to break in the first place?
Yes, not lubricating the hinge pins. You might also want to dispense with petroleum grease on the glide and switch to silicone grease.
Colin
BobD - 78 Bus . . . 112,730 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles

User avatar
asiab3
IAC Addict!
Location: San Diego, CA
Contact:
Status: Offline

Re: Sliding Door Hinge Assy Refresh

Post by asiab3 » Mon Apr 22, 2019 9:17 pm

The rivet can be replaced with an M6 Phillips head machine screw, and matching nut. This is one of the only places on the car where I would recommend a Nylock nut.

Just a note that some new nylon blocks require clearencing to fit into some bay slider door tracks. Once installed, the top inner corner needs a 45° angle cut a few mm deep to clear the block upper guide lip.

See how this one has an angled cut?

Image
https://www.bus-ok.de/Type2-bay-right-S ... -211843368

Some commonly available blocks don't have that cut, but need it:

Image
https://www.wolfsburgwest.com/cart/Deta ... =211843368

Part number 211843368.

See you on the road,
Robbie
1969 bus, "Buddy."
145k miles with me.
322k miles on Earth.

User avatar
vwlover77
IAC Addict!
Location: North Canton, Ohio
Status: Offline

Re: Sliding Door Hinge Assy Refresh

Post by vwlover77 » Fri Apr 26, 2019 6:54 am

Done! Wow, what a difference! (Not quite as quiet and smooth as Robbie's, but much, much better!)
Don

---------------------------
78 Westy
71 Super Beetle Convertible Autostick

"When we let our compassion go, we let go of whatever claim we have to the divine." - Bruce Springsteen

User avatar
Amskeptic
IAC "Help Desk"
IAC "Help Desk"
Status: Offline

Re: Sliding Door Hinge Assy Refresh

Post by Amskeptic » Fri Apr 26, 2019 9:54 am

vwlover77 wrote:
Fri Apr 26, 2019 6:54 am
Done! Wow, what a difference! (Not quite as quiet and smooth as Robbie's, but much, much better!)
When did you close Robbie's sliding door?

Our later bus sliding doors do not have the engineering of the originals . . .

Image
BobD - 78 Bus . . . 112,730 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles

User avatar
vwlover77
IAC Addict!
Location: North Canton, Ohio
Status: Offline

Re: Sliding Door Hinge Assy Refresh

Post by vwlover77 » Fri Apr 26, 2019 12:29 pm

Amskeptic wrote:
Fri Apr 26, 2019 9:54 am
When did you close Robbie's sliding door?
I have not had the pleasure, I only compared his video posting to mine. :geek:

https://www.youtube.com/watch?v=T8HR26nh6WA
Don

---------------------------
78 Westy
71 Super Beetle Convertible Autostick

"When we let our compassion go, we let go of whatever claim we have to the divine." - Bruce Springsteen

User avatar
asiab3
IAC Addict!
Location: San Diego, CA
Contact:
Status: Offline

Re: Sliding Door Hinge Assy Refresh

Post by asiab3 » Fri Apr 26, 2019 6:25 pm

Instagram? The Samba maybe?

A well-ministered-to late slider is superior in operation to a dirty or neglected early slider, but it’s true.... the early sliders offer an inherent precision that is a joy to live with. Though I have found a trick for the late bay coil spring that allows easier/quieter closing and opening without sacrificing security... I will post it here as soon as I can replicate it on three late buses.

One down, two to go.
Robbie
1969 bus, "Buddy."
145k miles with me.
322k miles on Earth.

User avatar
vwlover77
IAC Addict!
Location: North Canton, Ohio
Status: Offline

Re: Sliding Door Hinge Assy Refresh

Post by vwlover77 » Sat Apr 27, 2019 5:22 am

asiab3 wrote:
Fri Apr 26, 2019 6:25 pm
I have found a trick for the late bay coil spring that allows easier/quieter closing and opening without sacrificing security.
Does it involve reducing the spring tension? As I worked through the refresh it seemed that the door would work very well with much less tension. Maybe the high tension is safety factor for crud accumulation?
Don

---------------------------
78 Westy
71 Super Beetle Convertible Autostick

"When we let our compassion go, we let go of whatever claim we have to the divine." - Bruce Springsteen

User avatar
asiab3
IAC Addict!
Location: San Diego, CA
Contact:
Status: Offline

Re: Sliding Door Hinge Assy Refresh

Post by asiab3 » Sat Apr 27, 2019 2:56 pm

vwlover77 wrote:
Sat Apr 27, 2019 5:22 am
Does it involve reducing the spring tension? As I worked through the refresh it seemed that the door would work very well with much less tension. Maybe the high tension is safety factor for crud accumulation?
Essentially, yes. The tension isn't a problem if everything is clean, lubricated, and adjusted properly. Like I said, I need to prove it first; last late bay I worked on had missing components that we pieced together from ads, so I'm not sure my hack will work on a factory door.

Robbie
1969 bus, "Buddy."
145k miles with me.
322k miles on Earth.

Post Reply