Committed, Gretchen Ghia Body-Off Restoration.

Beetle, Karmann Ghia, Thing.

Moderators: Sluggo, Amskeptic

User avatar
ruckman101
Lord God King Bwana
Location: Up next to a volcano.
Contact:
Status: Offline

Committed, Gretchen Ghia Body-Off Restoration.

Post by ruckman101 » Sat Jun 14, 2014 4:01 pm

It has begun.


neal
The slipper has no teeth.

User avatar
Amskeptic
IAC "Help Desk"
IAC "Help Desk"
Status: Offline

Re: Committed, Gretchen Ghia Body-Off Restoration.

Post by Amskeptic » Sat Jun 14, 2014 8:35 pm

ruckman101 wrote:It has begun.


neal
Will this be the blog thread diary of the process?
Colin
BobD - 78 Bus . . . 112,730 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles

User avatar
ruckman101
Lord God King Bwana
Location: Up next to a volcano.
Contact:
Status: Offline

Re: Committed, Gretchen Ghia Body-Off Restoration.

Post by ruckman101 » Sat Jun 14, 2014 9:47 pm

That was the plan. Didn't get too far today. Where to begin? Bumpers. PB Blaster, but even then, the first bolt I attempted to extract broke off at the head. Better luck with the rest. It's gonna hurt the wallet.

A surprise on the rear bumper.

Image

Image

An inexpensive spare key. Feels like aluminum.

Some particular nastiness behind the rear wheel on the driver's side.

Image

Lots of bubbling paint along the heater channels, too. And rust about everywhere.

Image

Image

And most of the rubber looks kinda like this on the driver's side turn signal.

Image

Image

Eh, got the bumpers off, one head light, one tail light, and that was about it. Rusting bits hit with PB Blaster for the night and more tomorrow. Good golly much to do.


neal
The slipper has no teeth.

User avatar
ruckman101
Lord God King Bwana
Location: Up next to a volcano.
Contact:
Status: Offline

Re: Committed, Gretchen Ghia Body-Off Restoration.

Post by ruckman101 » Sat Jun 14, 2014 10:06 pm

I'll take all the advice I can get. Questions abound. The plan is to dip the body parts to strip of paint and start fresh. Seems like I should be doing all the welding and body work before the dip, so the primer can be immediately applied and then parts painted before reassembly. Re-chrome the bumpers? Yikes. No wonder fully restored cars carry such big selling prices.


neal
The slipper has no teeth.

User avatar
zabo
Old School!
Location: earth
Contact:
Status: Offline

Re: Committed, Gretchen Ghia Body-Off Restoration.

Post by zabo » Sun Jun 15, 2014 6:35 am

well i would strip the paint 1st wether its dipping or blasting.
That way you can see all the stuff that the pretty paint is hiding.
60 beetle
78 bus

User avatar
Bleyseng
IAC Addict!
Location: Seattle again
Contact:
Status: Offline

Re: Committed, Gretchen Ghia Body-Off Restoration.

Post by Bleyseng » Sun Jun 15, 2014 8:18 am

Dip? I would have the body, doors, hoods etc media blasted down to bare metal (not sand blasted!) All the rest of the parts you can strip with a orange citrus based stripped that won't harm them. Rusty stuff can be restored via the battery charger electrolysis method or batch the parts you want coated in yellow or silver chromate.
Geoff
77 Sage Green Westy- CS 2.0L-160,000 miles
70 Ghia vert, black, stock 1600SP,- 139,000 miles,
76 914 2.1L-Nepal Orange- 160,000+ miles
http://bleysengaway.blogspot.com/

User avatar
hambone
Post-Industrial Non-Secular Mennonite
Location: Portland, Ore.
Status: Offline

Re: Committed, Gretchen Ghia Body-Off Restoration.

Post by hambone » Sun Jun 15, 2014 11:02 am

You can always just start with the active rust, stripping the whole body is $$$ and mucho time. You can't afford it either. Me 2.
http://greencascadia.blogspot.com
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat

User avatar
ruckman101
Lord God King Bwana
Location: Up next to a volcano.
Contact:
Status: Offline

Re: Committed, Gretchen Ghia Body-Off Restoration.

Post by ruckman101 » Sun Jun 15, 2014 11:07 am

Debt is an American tradition.


neal
The slipper has no teeth.

User avatar
ruckman101
Lord God King Bwana
Location: Up next to a volcano.
Contact:
Status: Offline

Re: Committed, Gretchen Ghia Body-Off Restoration.

Post by ruckman101 » Sun Jun 15, 2014 1:49 pm

Slow going. Over two hours and I've managed to get one nostril grille removed, the front logo, the horn, and the other head light, after drilling off the head of the screw holding the trim ring on. The driver side turn signal was attached with two stainless philips head fine threaded screws, but the passenger side has nuts rusted up real well. Slow going.


neal
The slipper has no teeth.

User avatar
Amskeptic
IAC "Help Desk"
IAC "Help Desk"
Status: Offline

Re: Committed, Gretchen Ghia Body-Off Restoration.

Post by Amskeptic » Sun Jun 15, 2014 6:48 pm

ruckman101 wrote:Slow going. Over two hours and I've managed to . . . Slow going.
neal
Neal, banish those thoughts of quantity-based "productivity". You are on an open-ended journey and there is no manager breathing down your neck. I took two days to scrape/sand/paint a couple of heater valves and two pipes-with-brackets from the exchangers. If I tormented myself with the very real likelihood that I would be fired from a body shop with my rate of "production", I'd make myself miserable. Your Gretchen needs extra care with all of this rust binding things together or collapsing. That is all that counts, that you take care of each operation to protect what is there and make it whole where you need to, and have fun with this resurrection. How many cars get to thank their lucky stars that their owner is going to restore them?
Colin
BobD - 78 Bus . . . 112,730 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles

User avatar
ruckman101
Lord God King Bwana
Location: Up next to a volcano.
Contact:
Status: Offline

Re: Committed, Gretchen Ghia Body-Off Restoration.

Post by ruckman101 » Sun Jun 15, 2014 10:54 pm

Or buy another Ghia, my brother-in-law's advice. He points out another Ghia is most likely a less expensive option. Another unknown. I guess I could start by scraping and poking at issues, issues all Ghia's have. They sure can collect mud around the front and rear turn signals. There's certainly a level of rust that needs to be addressed. But there are other issues. Body sag and the like that impacts the door alignments, and more critically, the ability of the window seals to be effective at actually sealing. Crusty brittle rubber is another factor. I've already got two applications of Goop applied to front and rear windows. And you know there's going to be rust under there, too. I took another gander at Gretchen, and was encouraged. Hopefully that encouragement will be sustained.

Gretchen's story is told as each part comes off. Whoever painted her black only got one front turn signal off. Paint under the rubber of one, but not the other. The horn, also didn't come out.

We'll continue on this path and see where it takes us.


neal
The slipper has no teeth.

User avatar
ruckman101
Lord God King Bwana
Location: Up next to a volcano.
Contact:
Status: Offline

Re: Committed, Gretchen Ghia Body-Off Restoration.

Post by ruckman101 » Sun Jun 15, 2014 11:21 pm

zabo wrote:well i would strip the paint 1st wether its dipping or blasting.
That way you can see all the stuff that the pretty paint is hiding.
Tearing into the paint is such a final commitment. And isn't one of the points of dipping is that it strips the paint and rust? Or is it just a clean before primer and painting. I certainly want to knock off any lurking bondo.


neal
The slipper has no teeth.

User avatar
ruckman101
Lord God King Bwana
Location: Up next to a volcano.
Contact:
Status: Offline

Re: Committed, Gretchen Ghia Body-Off Restoration.

Post by ruckman101 » Sun Jun 15, 2014 11:33 pm

Bleyseng wrote:Dip? I would have the body, doors, hoods etc media blasted down to bare metal (not sand blasted!) All the rest of the parts you can strip with a orange citrus based stripped that won't harm them. Rusty stuff can be restored via the battery charger electrolysis method or batch the parts you want coated in yellow or silver chromate.
I like the electrolysis suggestion. Like for the headlight assembly and the smaller bits. Been looking into soda blasting. Are you saying that rust free parts can be primered with yellow or silver chromate plating through a similar electrolysis process?

neal
The slipper has no teeth.

User avatar
Bleyseng
IAC Addict!
Location: Seattle again
Contact:
Status: Offline

Re: Committed, Gretchen Ghia Body-Off Restoration.

Post by Bleyseng » Mon Jun 16, 2014 7:08 pm

yes, lots of places do the plating that matches the VW yellow or silver chromate plating. You clean or they clean the parts and plate them so take stuff in batches.
I need to do this for my Ghia stuff. Soon, soon to come but first tranny rebuild time and a engine reseal cleanup.
Geoff
77 Sage Green Westy- CS 2.0L-160,000 miles
70 Ghia vert, black, stock 1600SP,- 139,000 miles,
76 914 2.1L-Nepal Orange- 160,000+ miles
http://bleysengaway.blogspot.com/

User avatar
ruckman101
Lord God King Bwana
Location: Up next to a volcano.
Contact:
Status: Offline

Re: Committed, Gretchen Ghia Body-Off Restoration.

Post by ruckman101 » Tue Jun 17, 2014 1:40 pm

Ok, found an outfit in Portland, American Metal Cleaning, Inc., that can deal with the body in terms of paint stripping, rust removal etc., with an electrolysis process, not an acid dip. The rep I spoke to claimed it doesn't rust up as quickly as it would with an acid bath dip. Epoxy primer, then metal work, then paint. Brace the body at the doors. About $1.520 for body, doors and lids. Three month wait to get to the body. I'm on the list.


neal
The slipper has no teeth.

Post Reply