Nosecone Torque Figures?
Posted: Thu Jun 23, 2011 9:14 am
I have to reinstall the nosecone after repairing the shift rod mechanism and replacing the selector bearings.
Do the bolts holding the nosecone on need to be torqued? ( found the torque 11 ft lbs)
The existing gasket looks like it was just sandwiched in there. Does the new one require sealant?
Thanks
Do the bolts holding the nosecone on need to be torqued? ( found the torque 11 ft lbs)
The existing gasket looks like it was just sandwiched in there. Does the new one require sealant?
Thanks