Clutch...Gone in sixty seconds.

[Hippie]

I wanted to know what was so desperately wrong with Bill's flywheel.

It's the wrong (i.e. smaller) size and this one is the correct 228mm version.

Yep. It has a 1700 or 1800 clutch...too small. Because the flywheel is the wrong one.
Don was kind enough to donate this for cost of shipping.
Sorry I didn't get back to you...I got pretty busy with some stuff. Haven't even checked email in almost a week.


Rob

[vwlover77]

I spoke with Bill today and he's got the flywheel I sent, new clutch, and new pressure plate installed and everything back in the Bus (but not running just yet).

He said that his old flywheel and the one I sent were the same outside diameter, it's just that the one I sent has a larger inside diameter where the clutch disk installs. So, there should be no issues with the bellhousing or starter.

[Hippie]

And he sent the money, for shipping he told me.
Looks like it's a go.
=D>
Now, if anyone has a line on a good, used Toyota Sienna for Bill (not to replace the Westy) 'cause... kid #4 is on the way and he needs the third row seat.
And seat belts...
And heat...



Rob