Amskeptic wrote:
I look forward to finding out. Advance unit frozen?
Colin
~I look forward to finding out with you Amskeptic! In fact I fully suspect and expect that you will leave me with quite a list of things that will keep me happily busy for the entire upcoming year! :thumb left:
~I cleaned the friction plate a while back, maybe there's something I overlooked there, I'll have to check it out again.
~I was looking for air leaks the other day and started to suspect the crankcase breather tower O-ring, which I plan on replacing but I also came across this:
I read a post on here about this and can't seem to relocate it... shoulda woulda coulda bookmarked that one...
~Also started wondering about the connection between the throttle body and the intake air plenum... It looked like this:
There was so much sealant on there that it probably wasn't leaking, but what a time consuming hassle to clean it all up. I removed the dent and have the proper gasket ordered.
I had just got everything back together from doing the hydraulic lifters. While waiting on the parts I freshened up the exhaust following information from
Greetings From Florida I
It came out acceptably, other than running out of paint before I could hit the bolts and muffler clamp.
Incidentally, does anyone know if Odyssa here is Medium Blue (LH5G) or Guinea Blue (LH5K)?
In other news, the snow is quickly melting above 9,000' in the Tetons
Tim hope to take care of that rust while waiting for parts