Type 3 rotor compatibility

Moderators: Sluggo, Amskeptic

Post Reply
User avatar
whc03grady
IAC Addict!
Location: Livingston Montana
Contact:
Status: Offline

Type 3 rotor compatibility

Post by whc03grady » Fri Mar 19, 2010 6:54 pm

Are all four-bolt Type III rotors created equal?
Ludwig--1974 Westfalia, 2.0L (GD035193), Solex 34PDSIT-2/3 carburetors.
Gertie--1971 Squareback, 1600cc with Bosch D-Jetronic fuel injection from a '72 (E brain).
Read about their adventures:
http://www.ludwigandgertie.blogspot.com

User avatar
Amskeptic
IAC "Help Desk"
IAC "Help Desk"
Status: Offline

Re: Type 3 rotor compatibility

Post by Amskeptic » Sat Mar 20, 2010 7:28 am

whc03grady wrote:Are all four-bolt Type III rotors created equal?
Yes . . . IIRC Karmann Ghia too.
Colin
BobD - 78 Bus . . . 112,730 miles
Chloe - 70 bus . . . 217,593 miles
Naranja - 77 Westy . . . 142,970 miles
Pluck - 1973 Squareback . . . . . . 55,600 miles
Alexus - 91 Lexus LS400 . . . 96,675 miles

User avatar
whc03grady
IAC Addict!
Location: Livingston Montana
Contact:
Status: Offline

Post by whc03grady » Sat Mar 20, 2010 8:09 am

Russ Wolfe wrote:NO, 72-73 are bigger.
66 thru 71 are the same.
Amskeptic wrote:Yes . . . IIRC Karmann Ghia too.
Either way, I'm good with the junkyard car I need to get a couple rotors off of, a '68 or '69.
Ludwig--1974 Westfalia, 2.0L (GD035193), Solex 34PDSIT-2/3 carburetors.
Gertie--1971 Squareback, 1600cc with Bosch D-Jetronic fuel injection from a '72 (E brain).
Read about their adventures:
http://www.ludwigandgertie.blogspot.com

Post Reply