Why I like lye...
- DurocShark
- IAC Addict!
- Location: A Mickey Mouse Town
- Contact:
- Status: Offline
Why I like lye...
I filled a coffee can with water and drain cleaner (lye). Dropped a valve cover in and left it overnight. This batch I kept in the garage at near freezing temps...
Pulled it out, rinsed it off, and the paint, rust, etc, just fell off. A quick rubdown with oil for now since I failed to remember that I'd be dealing with bare steel. Need some "Prep N Prime" then I can paint it.
The lye works better when kept warm, so I made two cans full and put them on my electric burners yesterday (while the wife was gone, and daughter sick in bed). Took less than an hour to do the other half of that valve cover.
Now I'm scrounging a heat plate for the garage so I don't have to do it in the kitchen anymore. heh.
Can you believe they use this stuff for making soap, biodiesel, PEELING TOMATOES, exfoliating skin, etc? Scary. heh
Nice thing is that it gives off no fumes unlike most parts cleaners. It's still dangerous, but I'm not worried about the fumes getting in the house.
Pulled it out, rinsed it off, and the paint, rust, etc, just fell off. A quick rubdown with oil for now since I failed to remember that I'd be dealing with bare steel. Need some "Prep N Prime" then I can paint it.
The lye works better when kept warm, so I made two cans full and put them on my electric burners yesterday (while the wife was gone, and daughter sick in bed). Took less than an hour to do the other half of that valve cover.
Now I'm scrounging a heat plate for the garage so I don't have to do it in the kitchen anymore. heh.
Can you believe they use this stuff for making soap, biodiesel, PEELING TOMATOES, exfoliating skin, etc? Scary. heh
Nice thing is that it gives off no fumes unlike most parts cleaners. It's still dangerous, but I'm not worried about the fumes getting in the house.
- hambone
- Post-Industrial Non-Secular Mennonite
- Location: Portland, Ore.
- Status: Offline
Found out by accident: spray carb cleaner removes paint like th' dickens. Spray on, wait a couple minutes, wipe off paint.
http://greencascadia.blogspot.com
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat
- DurocShark
- IAC Addict!
- Location: A Mickey Mouse Town
- Contact:
- Status: Offline
Whatever was cheap at wallymart in the plumbing section. It's "Drain Out Crystal" clog remover. Has the magic words: "Best on Grease!"Westy78 wrote:Man that looks almost to easy. Did you actually use a specific drain cleaner or straight lye? I bet it would do great on a set of greasy tin.
It's actually a combination of sodium hydroxide and sodium nitrate. Probably not good stuff to chug on a saturday night... heh
- Amskeptic
- IAC "Help Desk"
- Status: Offline
Some of the cheaper "on sale!" carb cleaners strip paint with the best of them. I use GumOut because it is not so paint destructive and it is excellent for cleaning aluminum.
Valve cover restorations I usually clean the cork/oil/carbon out with GumOut, sand with 180/220 grit and then head straight to the sink for some dishwashing liquid and a heavy duty nylon scrubbing sponge. Then a new paint job.
Colin
Valve cover restorations I usually clean the cork/oil/carbon out with GumOut, sand with 180/220 grit and then head straight to the sink for some dishwashing liquid and a heavy duty nylon scrubbing sponge. Then a new paint job.
Colin
- DurocShark
- IAC Addict!
- Location: A Mickey Mouse Town
- Contact:
- Status: Offline
- Gypsie
- rusty aircooled mekanich
- Location: Treadin' Lightly under the Clear Blue!
- Status: Offline
- BlissfullyCrusin
- Getting Hooked!
- Location: A human cesspool wedged between MD and VA
- Status: Offline
- Gypsie
- rusty aircooled mekanich
- Location: Treadin' Lightly under the Clear Blue!
- Status: Offline
I know if I put aluminum in the dishwasher it comes out dull and matted (an apparent chemical reaction. )
test it on a piece of scrap. Let us know. I like to find cleaning products that are the least harmful on the environs. I am not sure if lye is "unharmful" but it feels like it is less than other solvents.
test it on a piece of scrap. Let us know. I like to find cleaning products that are the least harmful on the environs. I am not sure if lye is "unharmful" but it feels like it is less than other solvents.
So it all started when I wanted to get better gas mileage....
-
- I'm New!
- Location: Valley Springs, Ca and Portrush Northeren Ireland
- Contact:
- Status: Offline
Being a semi environmentalist ( I quit draining my engine oil on my dirt driveway at least =D> ) I prefer using the TSP substitute found a t Longs, Wal mart etc. You get the same results as above, just leave parts in a bucket with the TSP and water and it really cleans. Not to use on Aluminum or glass though.