Exhaust copper seals?

72Hardtop · Post by **72Hardtop** » Sun Feb 05, 2012 1:55 am

Any tips on annealing these? I was going to heat them up real good (till glowing) and then allow them to cool.

56ovalbug · Post by **56ovalbug** » Sun Feb 05, 2012 6:37 am

I just heat them up with a propane torch for a few minutes and then drop them on the floor. If they make a thud sound rather than a ringing sound then they're good to go.

sailorkh · Post by **sailorkh** » Sun Feb 05, 2012 9:36 am

This could be helpful

http://www.ratwell.com/technical/Exhaust.html

Post by **Amskeptic** » Sun Feb 05, 2012 9:46 pm

sailorkh wrote:This could be helpful

http://www.ratwell.com/technical/Exhaust.html

Or have a set of spare new copper rings and replace Every Time the exchangers are down.
Colin

Itinerant Air-Cooled

Itinerant Air-Cooled

Exhaust copper seals?

Exhaust copper seals?

Re: Exhaust copper seals?

Re: Exhaust copper seals?

Re: Exhaust copper seals?