Bus seals sale

Sell your Bay Window Bus (1968-1979) parts here.

Moderators: Sluggo, Amskeptic, vdubzen

Post Reply
User avatar
werksberg
Old School!
Location: The OC
Status: Offline

Bus seals sale

Post by werksberg » Sat Nov 29, 2008 3:29 pm

1968 - 1979 Bus door seals Pair (D & P side) $30

1972 -1979 rear Cargo door seal OEM $125

1968 - 1979 Side slide door seal German $125
Brazil $100

1968-1979 Front windshield seal Brazil $30

1968-1979 Engine weather seal German $60

Plus shipping (I like to use USPS Flat Rate Boxes at $10 to $12 each within the USA!) and 7 3/4% Calif. sales tax (if you live here...)

Paypal werksberg@sbcglobal.net
And if you do use Paypal, please state "IAC" (and IAC screen name too), make, model and year too!

MO / check (needs to clear before shipped) please state "IAC" (and IAC screen name too), make, model and year too!

Werksberg Products
PO Box 931
Garden Grove, Ca.

JM werksberg
Facebook for new product releases and special deals: Werks Berg
http://stores.ebay.com/werksberg
Search the Samba under werksberg for our products on sale there too....but order direct on here for a special IAC shipping savings
SOS: Support Our Shops....
werksberg@sbcglobal.net

User avatar
hambone
Post-Industrial Non-Secular Mennonite
Location: Portland, Ore.
Status: Offline

Post by hambone » Tue Jan 06, 2009 3:50 pm

What about bus engine compartment sound deading sheets (masonite?)? They mount to the roof right above the engine. Don't think anyone is making them, you can corner the market.

Early bays used solid sheets, later bays had many perforations.
http://greencascadia.blogspot.com
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat

User avatar
werksberg
Old School!
Location: The OC
Status: Offline

Post by werksberg » Mon Jan 19, 2009 3:47 pm

Hmmm...good point! I'll keep an eye out for a connection for some heat and oil resistant sheet materials.

I'll look a few friends engine compartments for what they have for ideas too.

Thanks, JM.
Facebook for new product releases and special deals: Werks Berg
http://stores.ebay.com/werksberg
Search the Samba under werksberg for our products on sale there too....but order direct on here for a special IAC shipping savings
SOS: Support Our Shops....
werksberg@sbcglobal.net

User avatar
werksberg
Old School!
Location: The OC
Status: Offline

Post by werksberg » Tue May 05, 2009 9:37 am

hambone wrote:What about bus engine compartment sound deading sheets (masonite?)? They mount to the roof right above the engine. Don't think anyone is making them, you can corner the market.

Early bays used solid sheets, later bays had many perforations.
A friend of mine is having a CNC lazer company to make these engine bay sound deadner panels and he hopes to have them at the OCTO Bus show on Sat. before the VW Classic.

Bill & Steve's VW Shop (562) 923-3251 already has some of them....but the guy that made them hand drilled all the holes himself.....can you say time extensive!
Facebook for new product releases and special deals: Werks Berg
http://stores.ebay.com/werksberg
Search the Samba under werksberg for our products on sale there too....but order direct on here for a special IAC shipping savings
SOS: Support Our Shops....
werksberg@sbcglobal.net

User avatar
hambone
Post-Industrial Non-Secular Mennonite
Location: Portland, Ore.
Status: Offline

Post by hambone » Tue May 05, 2009 9:42 am

Early bays don't have the holes. I actually wound up using my originals. Unwarped them in the rain, sealed the cracks and rips and painted with oilbased Rustoleum. Look like new!

Hey where are your front door seals made? Are they still on sale?
http://greencascadia.blogspot.com
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat

User avatar
static
IAC Addict!
Location: Somewhere on I-5
Status: Offline

Post by static » Tue May 05, 2009 10:41 am

My 1971 has the holes.

User avatar
hambone
Post-Industrial Non-Secular Mennonite
Location: Portland, Ore.
Status: Offline

Post by hambone » Tue May 05, 2009 10:44 am

68-69 two year only parts? Here we go again!
http://greencascadia.blogspot.com
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat

User avatar
dtrumbo
IAC Addict!
Location: Mill Creek, WA
Status: Offline

Post by dtrumbo » Tue May 05, 2009 11:11 am

hambone wrote:68-69 two year only parts? Here we go again!
My '70 has the tar-board looking stuff with no holes like yours. So make that three-year-only!
- Dick

1970 Transporter. 2015cc, dual Weber IDF 40's
1978 Riviera Camper. Bone stock GE 2.0L F.I.
1979 Super Beetle convertible.

... as it turns out, it was the coil!

User avatar
vistacruzer
IAC Addict!
Location: portland
Status: Offline

Post by vistacruzer » Wed May 06, 2009 10:00 am

what would you use to hold them up? mine is gone
71 bench 1915
70 wide lowered body rag top 2056 type4 DTM nothing stock if I could touch it.
Growing old is mandatory. Growing up is optional.

User avatar
hambone
Post-Industrial Non-Secular Mennonite
Location: Portland, Ore.
Status: Offline

Post by hambone » Wed May 06, 2009 10:02 am

There are metal tabs that bend over around the perimeters of the boards. I also used Liquid Nails TM underneath.
I'll show you next time I sees ya.
http://greencascadia.blogspot.com
http://pdxvolksfolks.blogspot.com
it balances on your head just like a mattress balances on a bottle of wine
your brand new leopard skin pillbox hat

User avatar
vistacruzer
IAC Addict!
Location: portland
Status: Offline

Post by vistacruzer » Wed May 06, 2009 5:34 pm

cool :pirate:
71 bench 1915
70 wide lowered body rag top 2056 type4 DTM nothing stock if I could touch it.
Growing old is mandatory. Growing up is optional.

User avatar
werksberg
Old School!
Location: The OC
Status: Offline

Post by werksberg » Tue Jun 09, 2009 5:57 pm

hambone wrote:Early bays don't have the holes. I actually wound up using my originals. Unwarped them in the rain, sealed the cracks and rips and painted with oil based Rustoleum. Look like new!

Hey where are your front door seals made? Are they still on sale?
Sorry, I missed seeing there was any posts on this thread. The door seals are Braisilian made door seals that are $30 for a pair.
Facebook for new product releases and special deals: Werks Berg
http://stores.ebay.com/werksberg
Search the Samba under werksberg for our products on sale there too....but order direct on here for a special IAC shipping savings
SOS: Support Our Shops....
werksberg@sbcglobal.net

User avatar
pjalau
Getting Hooked!
Contact:
Status: Offline

Post by pjalau » Wed Jun 10, 2009 9:36 am

And confirming, my 1970 does not have the holes either.








History of Holes by Peters improbably history with apologies to Mr. Peabody and his boy Sherman.

Holes appeared in 1971. Previous to that, there were no holes. Anywhere. Ever. The hole was invented in January 1971 accidentally by Dr. Robert Hole while deep frying a powdered dough. Dr. Hole was a former police officer who offered them to friends who remained in the force. The multipurpose of the hole was immediate recognized and used for a wide range of products including masonite engine sound deadeners for late bays. There are also other uses for the hole. (The author respectfully requests that all comments outside the bounds of common decency be posted as either a clever double-entendre, or not at all.)



P.S. I have a creative excercise to work on today, thanks for an opportunity to warm up.

User avatar
werksberg
Old School!
Location: The OC
Status: Offline

Post by werksberg » Sun Aug 02, 2009 3:25 pm

hambone wrote:What about bus engine compartment sound deading sheets (masonite?)? They mount to the roof right above the engine. Don't think anyone is making them, you can corner the market.

Early bays used solid sheets, later bays had many perforations.
The '68 - '71 Weekender model Bus engine compartment firewall kit does not have holes in them as they are smaller panels that fit up into the areas between the steel bar supports. I need to get my hands on a set asap.

But here's the non Weekender model (spare tire in the DS rear upper storage tub area) '68 - '71 Bus firewall kit (2x piece) $65 plus shipping:
Image

And here's the '73 - '79 Bus firewall kit (3x piece) $65 plus shipping:
Image
Image

Both come with all the hardware like the 3/16" oversize head alum pop rivets and you use the stock bend over tabs too.

The '73 - '79 kit includes black oxide sheet metal screws for the engine check lid...which is included in the kit too.

I do have a '72 year only OEM firewall kit (2x piece) here and I hope to get to those masters in the coming weeks.....
Facebook for new product releases and special deals: Werks Berg
http://stores.ebay.com/werksberg
Search the Samba under werksberg for our products on sale there too....but order direct on here for a special IAC shipping savings
SOS: Support Our Shops....
werksberg@sbcglobal.net

Post Reply